Get 24/7 HP Printer Downloads

HP Wireless Printer

HP Wireless Printer Setup Support

HP Wireless Printer Setup Support

HP wireless printers come with a wireless adapter that can be hooked up with a wireless network and it enables other devices that are hooked up to the same network to use the HP printer. Since the connection is established wirelessly, the printer can be placed anywhere. However, to make the best out of the printer’s wireless printing capabilities, it is essential to position the printer at a place where there is a good signal. The HP printer support team is available for providing assistance with HP wireless printer setup.

How to set up wireless networking?

To enable wireless networking, one needs to connect their wireless printer. Follow the steps given below to connect your HP wireless printer to a wireless network. HP printer technical support experts highly recommend that you should not skip any step.

  1. Firstly, unbox the HP printer.
  2. Simply follow the guidelines on the box for unpacking it.
  3. Attach the power cord to the printer.
  4. Power the HP printer on.
  5. Carefully insert the print cartridges.
  6. Let the printer boot up.
  7. Print an alignment sheet, if prompted.
  8. Now, just select a wireless connection method.

If you have any doubt regarding this process, then dial HP printer toll-free number, and the technicians at HP printer customer service will resolve your issue.

How to fix wireless networking errors?

Wireless printers often fail to connect to networks. If your HP printer was connecting to a Wi-Fi network before but is not connecting now, then get help from HP printer customer support. If your HP printer is failing to connect to a wireless network, then follow the steps given below:


  • Before you install the printing software and connect to a wireless network, you need to go through the requirements. Power on the system and your router. After that, you need to set up your HP printer.
  • If you wish to connect your printer wirelessly, then you will require a few things:
    • A smart device or computer system connected to Wi-Fi. To find if your HP printer supports wireless networking, call HP printer support number and confirm it with the HP printer customer support staff.
    • Good internet connection.
  • You need to ensure that your router, as well as your computer, is powered on. Cross verify which network your computer is connected to.
  • After setting up your HP printer, insert the toner cartridges.
  • Power on your printer and position it in the proximity to the router and computer.

Install HP Print Driver to fix the wireless networking issue

Go to the device you need to print from and fire up the installation process. After downloading and installing HP full feature printer driver, do the following:

  1. Detach the USB cable from the rear of your printer.
  2. Now, download and run HP Easy Start.
  3. In the Choose a printer screen, select My Printer is Not Shown.
  4. Now, wait for a while, and your problem will get fixed.
  5. Even after applying the methods given above, if the issue persists, then take assistance from HP printer customer service by dialing the HP printer support number.

Avail the HP printer technical support service to get instant and effective resolutions. The best thing about the support service is that the lines for HP printer toll-free number are always up and running.

Common Errors You May Face with Your HP Printer